Introduction

SmartSolar MPPT Charge Controller – 100V – 50AMP

Features:

• Bluetooth Smart built-in The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.
• VE.Direct For a wired data connection to a Color Control GX, other GX products, PC or other devices
• Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
• Load output Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof.
• Battery Life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a partially charged state and the end of discharge state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.
• Programmable battery charge algorithm See the software section on our website for details
• Day/night timing and light dimming option See the software section on our website for details
• Internal temperature sensor Compensates absorption and float charge voltage for temperature.
• Optional external battery voltage and temperature sensing via Bluetooth A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers

Warranty Info

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Please contact your dealer for any returns, repairs or support issues related to this product.

The solar charger collects energy from the solar panel and stores it in the battery. Using the latest and fastest technology, SmartSolar can maximize energy consumption to drive it… !!!!—-
PRODUCT ID: 82977
SKU: NVN-82977
CSKU: CWR-82977
REWRITE: 94088-victron-smartsolar-mppt-charge-controller-100v
MPN: SCC110050210
UPC: 8719076040194
ASIN: B073ZJ43L1
WSKU:
SSKU: VIC-SCC110050210
KSKU: VICSCC1100502
GSKU:
MSKU:
LSKU:
NAME: Victron SmartSolar MPPT Charge Controller – 100V – 50AMP
NAME_EX: VICTRON SMARTSOLAR MPPT 100/50
PTITLE: Victron SmartSolar MPPT Charge Controller – 100V – 50AMP
TYPE: Electrical | Battery Chargers
VENDOR: Victron Energy
Google Category: VEHICLES & PARTS > VEHICLE PARTS & ACCESSORIES > WATERCRAFT PARTS & ACCESSORIES
Amazon Category: CE
Amazon Title: SmartSolar MPPT 100/50 Charge Controller
Google Title: Victron Energy SmartSolar MPPT 100/50
Amazon Category: CE
Gtags:

GSpecs: