Introduction

Versatile, easy-to-use, general purpose epoxy adhesive is two-part adhesive and filler system. Sets in five minutes, no clamping needed. Clear appearance. Fills gaps and will not shrink. Resistant to water and solvents. Temperature range -60 Degree Fahrenheit to 180 Degree Fahrenheit (-51 Degree Celsius to 82 Degree Celsius). Permanent strength up to 3400 PSI. Self-mixing dual syringe (84164) blends the adhesive and filler as it dispenses, eliminating the need for manual mixing.

Permatex 84160 Attributes

• Recommended Use:Bonds Rigid Materials/ Fills Gaps, Bond Dissimilar Materials/ Casting Cracks And Mount Components
• Unit Size:0.84 Ounce
• Unit Type:Dual Syringe
• Unit Quantity:Single

Permatex 84160 Features & Benefits

• Maximum Strength Formula That Is Available In Several Working Times
• Ideal For Complex, Multi-Piece Assemblies
• Will Not Shrink
• No Clamping Needed
• Fills Gaps
• Impact And Water Resistant
• No Supplier Warranty

Permatex 84160 Technical Bulletins

• 84160-01.pdf
• 84160.pdf

1 Minute General Purpose Gel Epoxy – .84oz

General Purpose 1 Minute Gel Epoxy is a fast setting, two-part adhesive and filler system specially formulated with a Blue Dye Indicator that disappears when its fully mixed and ready to use. The advanced gel formulation reduces mess and waste compared to traditional epoxies; unique indicator system takes the guesswork out of ready to use.

Features:

• Non-drip formula allows for mess free application
• Can easily be applied to overhead and hard to reach places
• Sets in just 1 minute/Cures in 5 minutes
• Blue dye indicator disappears when epoxy is ready to apply
• No clamping required
• Bonds to metals, hard plastics, ceramics, and more!

Applications:

• Automobile – Suggested Applications: Ideal for complex, multi-piece assemblies. Bonds rigid materials including, ceramic, chrome, fabric, fiberglass, glass, hard plastic, and metal and rubber.

Directions:

1. PROTECT: Work area must be protected from accidental spills.
2. CLEAN: Surfaces must be clean, dry and free of grease and oil.
3. PREPARE: Roughen smooth surfaces (using abrasives or sandpaper).
4. OPEN PACKAGE: Remove Syringe. Turn syringe nozzle end up and pull plunger back slightly (1/8). Allow air bubbles to rise to top. Snap off and save storage cap. Push plunger to dispense equal amounts of hardener and resin onto discard-able surface such as a piece of cardboard. Mixing paddle will pop out from plunger. Pull back plunger tostop flow. Snap cap back on.
5. MIX QUICKLY: Quickly and thoroughly mix until blue color turns clear (about 15 sec).
6. APPLICATION: Apply small amount of mixture to both surfaces and assemble parts immediately (product sets in approximately 60 seconds). Remove any excess epoxy immediately.
7. CURE TIME: Usable strength is reached in 1 hour at 72F (22C).Cooler temperatures may require longer set time.
8. CLEAN-UP: Attach nozzle cap and store in molded tray.

NOTE: Adhesive will not bond most polyethylene or polypropylene plastics.

!!!!—-
PRODUCT ID: 84635
SKU: NVN-84635
CSKU: CWR-84635
REWRITE: 95746-permatex-1-minute-general-purpose-gel-epoxy
MPN: 84160
UPC: 686226841605
ASIN: B000HBI9KK
WSKU:
SSKU:
KSKU: P1384160
GSKU:
MSKU:
LSKU:
NAME: Permatex 1 Minute General Purpose Gel Epoxy – .84oz
NAME_EX: PERMATEX PERMAPOXY 1 MINUTE GENERAL PURPOSE EPOXY .84FL OZ
PTITLE: Permatex 1 Minute General Purpose Gel Epoxy – .84oz
TYPE: Boat Outfitting | Cleaning
VENDOR: Permatex
Google Category: VEHICLES & PARTS > VEHICLE PARTS & ACCESSORIES > WATERCRAFT PARTS & ACCESSORIES > WATERCRAFT CARE > WATERCRAFT CLEANERS
Amazon Category: Automotive Parts and Accessories
Amazon Title: Permatex 84160 PermaPoxy 1 Minute General Purpose Epoxy, 0.84 oz.
Google Title: Permatex 84160 1-Minute Epoxy Clear – Each
Amazon Category: Automotive Parts and Accessories
Gtags:

GSpecs: