Introduction

RailMount Pre-Cut GPSMAP for 742xs, 742, 722xs & 722 Fits 1″ or 1.25″ Tubing

RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1 or 1.25 diameter tube. A Nickel Chrome-Plated Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wiring runs from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.

RailMounts are designed for all popular standard size instruments as well as 7 and 9 inch chartplotters.

Structural Rigidity The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal All RailMount NavPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to compression set like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job.

Nickel Chrome-Plated Stainless Steel We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style!

Commitment to Quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.

The RailMount pre-cut GPSMAP for 742xs, 742, 722xs and 722 is suitable for 1 inch or 1.25 inch pipe. RailMount NavPods are most suitable for installing autopilots, navigational instruments or small aircraft. !!!!—-
PRODUCT ID: 78025
SKU: NVN-78025
CSKU: CWR-78025
REWRITE: 89136-navpod-railmount-pre-cut-gpsmap-f-742xs-742-722xs
MPN: RMX4400-09
UPC: 659988114355
ASIN: B07TWXD55W
WSKU: NAVRMX440009
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod RailMount Pre-Cut GPSMAP f/742xs, 742, 722xs & 722 Fits 1″ or 1.25″ Tubing
NAME_EX: NAVPOD RMX4400-09 RAILMOUNT PRE-CUT GPSMAP 742XS/742/722XS/722
PTITLE: NavPod RailMount Pre-Cut GPSMAP f/742xs, 742, 722xs & 722 Fits 1″ or 1.25″ Tubing
TYPE: Boat Outfitting | Display Mounts
VENDOR: NavPod
Google Category: ELECTRONICS > MARINE ELECTRONICS
Amazon Category: GPS or Navigation System
Amazon Title:
Google Title: NavPod RailMount Pre-Cut GPSMAP f/742xs, 742, 722xs & 722 Fits 1″ or 1.25″ Tubing – RMX4400-09
Amazon Category: GPS or Navigation System
Gtags:

GSpecs: