Introduction

SystemPod Pre-Cut for Raymarine AXIOM 9 & 2 Instrument (3.6 holes) for 9.5 Wide Guard (Pre-Cut for Surface Mount Using Rear Mounting Brackets) – For Power or Sail

SystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your finger tips. Where you need itwhen you need it. SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen.

For Sail: A SystemPod is best mounted on a Single Bend AngleGuard

For Power: A SystemPod can be dash mounted using the SK135 Stanchion Kit, or overhead mounted using the SK130 Stanchion Kit.

Structural Rigidity The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to compression set like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job.

Nickel Chrome Plated Stainless Steel We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style!

Commitment to Quality – We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.

Navpod GP108023 SystemPod model: GP1080-23 SystemPods are used to install radar or chartplotter and instruments on the helmet. Navigation at your fingertips. “Where you need it when you need it.” SystemPods is a smart solution that can mount radar or chartplotters and gauges on the steering gear, allowing you to easily operate and clearly see the details of the screen. You can use the SK135 fixing kit to install the SystemPod for Power in a short time, or you can use the SK130 fixing kit to install the SystemPod on the top. Structural rigidity Gen3 enhancements now include thicker acrylic-covered ABS material, which can increase strength and provide better structural rigidity. This thicker material can achieve a greater waterproof seal. The better the structural rigidity, the smaller the deflection when tightening, and the more uniform the pressure on the seal. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic protective layer protects ABS from ultraviolet rays and its potential damage to plastics. Waterproof seal All SystemPods are manufactured with a double gasket system, which provides an excellent waterproof seal. The seal can provide the best protection for your ship’s electronic equipment. SystemPods can withstand the harshest sea rowing conditions. Gen3 enhancements include thicker outer silicone gaskets for a better flush fit. Now, the thickness of the inner Poran Microcell polyurethane gasket has increased by 50% and, like many rubber compounds, is not affected by “compression set”. This is important when you need to open SystemPod to repair electronic devices in the future. The gasket will continue to function. NavPod wrenches with large round head tamper-proof screws have deeper sockets. Compared with the screws used on the traditional NavPod series, the clamping force is better when tightening. !!!!—-
PRODUCT ID: 74141
SKU: NVN-74141
CSKU: CWR-74141
REWRITE: 85252-navpod-systempod-pre-cut-f-raymarine-axiom-9
MPN: GP1080-23
UPC: 659988114492
ASIN: B07R8V4LT7
WSKU: NAVGP108023
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod SystemPod Pre-Cut f/Raymarine AXIOM 9 & 2 Instrument (3.6 holes) f/9.5 Wide Guard (Pre-Cut f/Surface Mount Using Rear Mounting Brackets)
NAME_EX: NAVPOD SAIL/POWER POD PRECUT FOR RAMARINE AXIOM 9 & 2
PTITLE: NavPod SystemPod Pre-Cut f/Raymarine AXIOM 9 & 2 Instrument (3.6 holes) f/9.5 Wide Guard (Pre-Cut f/Surface Mount Using Rear Mounting Brackets)
TYPE: Boat Outfitting | Display Mounts
VENDOR: NavPod
Google Category: ELECTRONICS > MARINE ELECTRONICS
Amazon Category: GPS or Navigation System
Amazon Title: NavPod GP1080-23 SystemPod Pre-Cut for Raymarine Axiom 9 and 2 inst. (3.6″ Holes) for 9.5″ Wide Guard (Pre-Cut is for Surface Mount Using Rear mounting Brackets)
Google Title: NavPod SystemPod Pre-Cut f/Raymarine AXIOM 9 2 Instrument (3.6 holes) f/9.5 Wide Guard (Pre-Cut f/Surface Mount Using Rear Mounting Brackets)
Amazon Category: GPS or Navigation System
Gtags:

GSpecs: